Sonex Drawing Revs and Service Bulletins

Waiex Optional Revision Log Updated 08.11.10

Wed, 11 Aug 2010 11:30:00 -0500

SNX-T06 Rev NC: Detail of -03 and -04 Drive Plates

Xenos Wing Hardware List Updated 08.10.10

Tue, 10 Aug 2010 15:40:00 -0500

Waiex Optional Revision Log Updated 08.04.10

Wed, 04 Aug 2010 14:30:00 -0500

SNX-T03 Rev A: Detail -03 Rudder Drive Horn

Waiex Fuselage Hardware List Updated 06.17.10

Thu, 17 Jun 2010 16:35:00 -0500

New EAA Video Tips posted to Sonex Site

Thu, 17 Jun 2010 11:55:00 -0500

Trimming AeroVee Pushrods

Upholstery Installation Instructions Posted 06.16.10

Wed, 16 Jun 2010 16:55:00 -0500

Xenos Wing Hardware List Updated 06.16.10

Wed, 16 Jun 2010 16:50:00 -0500

New EAA Video Tips posted to Sonex Site

Thu, 08 Apr 2010 11:45:00 -0500

Bending Aluminum Plate with an Arbor Press

New EAA Video Tips posted to Sonex Site

Fri, 02 Apr 2010 15:15:00 -0500

Removing Powder Coating

Fuel Tank Installation Instruction Sheet Updated 03.16.10

Tue, 16 Mar 2010 12:00:00 -0500

Sonex Oops Fittings Instruction Sheet Posted

Fri, 05 Mar 2010 11:00:00 -0600

Xenos Wing Hardware List Updated 02.24.10

Wed, 24 Feb 2010 12:00:00 -0600

Sonex Tool Videos Available Online

Fri, 29 Jan 2010 15:10:00 -0600

Sonex Optional Revision Log Updated 01.28.10

Thu, 28 Jan 2010 16:45:00 -0600

SNX-W03 Rev D: Detail -03 Hinge Half Identification

Xenos Wing Hardware List Updated 01.25.10

Tue, 26 Jan 2010 14:45:00 -0600

Sonex and Waiex Optional Revision Logs Updated 12.18.09

Fri, 18 Dec 2009 09:30:00 -0600

SNX-F25 Rev D and WIX-F26 Rev NC: Optional Substitution of CCC-46 rivets with CCP-46 rivets in Rudder Stop Plate installation.

Sonex and Waiex Optional Revision Logs Updated 12.04.09

Fri, 04 Dec 2009 11:00:00 -0600

SNX-C08 Rev A and SNX-C09 Rev A for Optional Center (Sport Trainer "ST") Controls.

New Sonex, Waiex, and Xenos Hardware Lists Posted 12.04.09

Fri, 04 Dec 2009 09:00:00 -0600

Sonex, Waiex, and Xenos Hardware Lists have been updated to accomodate Sub-Kit building.

Service Bulletin SNX-SB-005 Updated 12.04.09

Fri, 04 Dec 2009 08:50:00 -0600

Optional upgrade/repair documentation posted.

AeroVee Break-In Procedures Instruction Sheet Posted

Wed, 11 Nov 2009 12:00:00 -0600

General Service Bulletin Issued 11.02.09: SNX-SB-005

Wed, 11 Nov 2009 11:25:00 -0600

New EAA Video Tips posted to Sonex Site

Fri, 09 Oct 2009 15:40:00 -0500

Preparing Rotationally Molded Fuel Tanks for Installation

Optional Xenos Revision Log Updated 10.2.09

Fri, 02 Oct 2009 14:20:00 -0500

Drawings: XNS-P02, Rev NC, Detail B-B; XNS-P03, Rev NC, Detail B-B

Optional Waiex Revision Log Updated 10.2.09

Fri, 02 Oct 2009 14:20:00 -0500

Drawings: WIX-P02, Rev NC, Detail B-B; WIX-P03, Rev A, Detail B-B; WIX-P07, Rev A, Detail B-B

Optional Sonex Revision Log Updated 10.2.09

Fri, 02 Oct 2009 14:20:00 -0500

Drawings: SNX-P10, Rev A, Detail B-B; SNX-P20, Rev B, Detail B-B; SNX-P30, Rev A, Detail B-B

Optional Waiex Revision Log Updated 9.28.09

Mon, 28 Sep 2009 16:40:00 -0500

Drawing: WIX-F25, Rev A, Detail -05R and -05L

Optional Sonex Revision Log Updated 9.28.09

Mon, 28 Sep 2009 16:40:00 -0500

Drawings: SNX-F13, Rev NC, Detail -01

Optional Sonex Revision Log Updated 9.3.09

Thu, 03 Sep 2009 15:50:00 -0500

Drawings: SNX-G01, Rev C, Detail -05 Tank Assembly; SNX-T09, Rev NC, Section A-A

Optional Waiex Revision Log Updated 9.3.09

Thu, 03 Sep 2009 15:50:00 -0500

Drawing: WIX-G01, Rev B, Detail -05 Tank Assembly

Optional Xenos Revision Log Updated 9.3.09

Thu, 03 Sep 2009 15:50:00 -0500

Drawing: XNS-G01, Rev A, Detail -05 Tank Assembly

New EAA Video Tips posted to Sonex Site

Thu, 27 Aug 2009 16:00:00 -0500

Closing Aluminum Angle

New EAA Video Tips posted to Sonex Site

Thu, 20 Aug 2009 14:30:00 -0500

AeroVee Ignition Timing

New EAA Video Tips posted to Sonex Site

Fri, 07 Aug 2009 16:30:00 -0500

Drilling Titanium

Required Sonex Revision Log Updated 7.14.09

Tue, 14 Jul 2009 16:10:00 -0500

Drawing: SNX-C06, Rev N/C Detail -06

Required Xenos Revision Log Updated 7.02.09

Thu, 02 Jul 2009 09:50:00 -0500

Drawing: XNS-W05, Rev N/C Detail -01R and -01L; Drawing: XNS-W15, Rev N/C Detail -01R and -01L

New EAA Video Tips posted to Sonex Site

Thu, 04 Jun 2009 13:40:00 -0500

Polishing Aluminum

New EAA Video Tips posted to Sonex Site

Wed, 20 May 2009 11:30:00 -0500

AeroVee Valve Adjustment

New EAA Video Tips posted to Sonex Site

Fri, 24 Apr 2009 10:40:00 -0500

Cutting and Fitting a Sonex Aircraft Canopy

New EAA Video Tips posted to Sonex Site

Tue, 21 Apr 2009 11:00:00 -0500

Drilling Holes in Plexiglas

Optional Sonex Revision Log Updated 4.10.09

Fri, 10 Apr 2009 09:30:00 -0500

Drawing: SNX-C06, Rev NC Detail H-H Control Pushrod Cover Reference

Optional Sonex Revision Log Updated 2.25.09

Wed, 25 Feb 2009 10:15:00 -0600

Drawing: SNX-T07, Rev B Detail -05 Trim Tab

Optional Sonex Revision Log Updated 2.16.09

Mon, 16 Feb 2009 14:20:00 -0600

Drawing: SNX-C02, Rev E Detail -04

Optional Waiex Revision Log Updated 2.16.09

Mon, 16 Feb 2009 14:20:00 -0600

Drawing: WIX-C04, Rev NC Detail -07

Optional Sonex Revision Log Updated 2.6.09

Fri, 6 Feb 2009 15:40:00 -0600

Drawing: SNX-F17, Rev NC Detail -02

Optional Waiex Revision Log Updated 2.6.09

Fri, 6 Feb 2009 15:40:00 -0600

Drawing: WIX-F17, Rev NC Detail -02

Optional Xenos Revision Log Updated 2.6.09

Fri, 6 Feb 2009 15:40:00 -0600

Drawing: XNS-F17, Rev NC Detail -02

Reforming Aluminum Extrusions Instruction Sheet Posted

Fri, 2 Jan 2009 16:30:00 -0600

Some airframe parts require that the 90-degree aluminum extrusion from which they are made be reformed to a greater, or lesser bend angle. This is easily accomplished with common tools using the techniques illustrated in this instruction sheet.

Bending Flat Parts Instruction Sheet Posted

Fri, 2 Jan 2009 16:30:00 -0600

Some airframe parts require bending, whether bending a flat part to a given angle, or reforming an existing angle (rib flange, channel flange, etc.) to a proper fit. This can easily be accomplished using simple tools and the techniques illustrated in this instruction sheet.

Optional Sonex Revision Log Updated 1.6.09

Tue, 6 Jan 2009 14:55:00 -0600

Drawing: SNX-W25, Rev NC Detail of Aileron Balancing

Optional Waiex Revision Log Updated 1.6.09

Tue, 6 Jan 2009 14:55:00 -0600

Drawing: WIX-W22, Rev NC Detail of Aileron Balancing

Optional Xenos Revision Log Updated 11.18.08

Tue, 18 Nov 2008 11:20:00 -0600

Drawing: XNS-T10, Rev NC (drawing XNS-T09A added for PDF download)

AeroConversions Oil Separator Installation Instructions Posted

Mon, 17 Nov 2008 16:30:00 -0600

Optional Sonex Revision Log Updated 11.12.08

Wed, 12 Nov 2008 11:20:00 -0600

Drawings: SNX-B03, Rev G; SNX-C06, Rev NC (Lowered Seat Modification); SNX-C07, Rev NC (Lowered Seat Modification); SNX-C08, Rev NC (Sport Trainer Modification); SNX-C09, Rev NC (Sport Trainer Modification); SNX-W24, 25, 26, 27, Rev NC (Sport Acro Aileron Modification)

Optional Waiex Revision Log Updated 11.12.08

Wed, 12 Nov 2008 11:20:00 -0600

Drawings: SNX-C08, Rev NC (Sport Trainer Modification); SNX-C09, Rev NC (Sport Trainer Modification)

Updated Electronic Instrument Installation Instructions Posted

Mon, 27 Oct 2008 10:45:00 -0500

New EAA Video Tips posted to Sonex Site

Fri, 24 Oct 2008 11:25:00 -0500

Making a Sheet Metal Rib from scratch, part 6; Blue Lining a Rib for Installation

New EAA Video Tips posted to Sonex Site

Tue, 7 Oct 2008 14:45:00 -0500

Making a Sheet Metal Rib from scratch, part 5

New EAA Video Tips posted to Sonex Site

Fri, 26 Sep 2008 09:50:00 -0500

Making a Sheet Metal Rib from scratch, part 4

New EAA Video Tips posted to Sonex Site

Fri, 19 Sep 2008 16:40:00 -0500

Making a Sheet Metal Rib from scratch parts 2 and 3; Drilling in Tight Places

Sonex Video Tips Now Online!

Fri, 05 Sep 2008 16:40:00 -0500

Optional Xenos Revision Log Updated 08.20.08

Wed, 20 Aug 2008 13:20:00 -0500

Drawings: XNS-C01, Rev NC

Optional Xenos Revision Log Updated 08.19.08

Tue, 19 Aug 2008 11:35:00 -0500

Drawings: XNS-W02, Rev NC; XNS-W03, Rev NC

Optional Waiex Revision Log Updated 08.12.08

Tue, 12 Aug 2008 16:40:00 -0500

Drawing WIX-W14, Rev A

Optional Sonex Revision Log Updated 08.12.08

Tue, 12 Aug 2008 17:00:00 -0500

Drawing SNX-W08, Rev C

AeroConversions CHT Probe Installation Instructions Posted 08.11.08

Mon, 11 Aug 2008 11:45:00 -0500

AeroVee 2-into-1 Stainless Exhaust Installation Instructions Posted 08.11.08

Mon, 11 Aug 2008 11:45:00 -0500

Cowling Installation Instructions Posted 08.11.08

Mon, 11 Aug 2008 11:45:00 -0500

Jabiru 3300 Oil Cooler Upgrade Installation Instructions Posted 08.11.08

Mon, 11 Aug 2008 11:45:00 -0500

Electronic Instrument Installation Instructions Updated 07.14.08

Mon, 14 Jul 2008 10:20:00 -0500

Optional Sonex Revision Log Updated 06.26.08

Thu, 26 Jun 2008 13:15:00 -0500

Drawing SNX-F23, Rev B

Waiex Hardware List Update Issued 05.07.08

Mon, 7 Apr 2008 11:50:00 -0500

Fuel Tank Installation Instructions Updated 04.04.08

Fri, 4 Apr 2008 10:33:00 -0500

Required Sonex Revision Log Last Updated 12.06.04

Thu, 24 Jan 2008 11:50:31 -0600

Optional Sonex Revision Log Last Updated 10.31.07

Thu, 24 Jan 2008 11:50:09 -0600

No Required Waiex Revisions Released To-Date

Thu, 24 Jan 2008 11:49:37 -0600

Optional Waiex Revision Log Last Updated 10.31.07

Thu, 24 Jan 2008 11:49:22 -0600

Xenos Hardware List Update Issued 06.06.07

Thu, 24 Jan 2008 11:48:18 -0600

No Required Xenos Revisions Issued To-Date

Thu, 24 Jan 2008 11:47:39 -0600

Optional Xenos Revision Log Last Updated 10.31.07

Thu, 24 Jan 2008 11:47:02 -0600

Last General Service Bulletin Issued 07.03.07: SNX-SB-004

Thu, 24 Jan 2008 11:44:55 -0600

Last Sonex Service Bulletin Issued 11.21.05: SNX-SB-003

Thu, 24 Jan 2008 11:44:04 -0600

No Waiex Service Bulletins Issued To-Date

Thu, 24 Jan 2008 11:43:20 -0600

No Xenos Service Bulletins Issued To-Date

Wed, 23 Jan 2008 16:59:39 -0600